The next generation of RoadSaver features an eco-friendly design with No Side Engine – an industry first. Reduce emissions, maintenance & administrative costs with the RoadSaver IIIG. See our RoadSaver IIIG Brochure to learn more.
|Width||8.0 ft||2.4 M|
|Height Above Frame||7.0 ft||2.1 M|
|Aggregate Bin||12 Cu. Yds.||9.2 M3|
|Water Tank||800 Gallons||3040 L|
|Emulsion Tank||800 Gallons||3040 L|
|Additive Tank||90 Gallons||304 L|
|Fines Feeder||16 Cu. Ft.||9.2 M3|
¼” (.635 cm) ASTM A572 High Tensile Steel formed plate construction: Front, Sides, Bottom Sections. Top-Rear Plate Section attached to aggregate hopper are formed 3/16” (.47625 cm) ASTM A572 High Tensile Steel. All corner seams are overlapped & welded inside & out. Structural Channel stress-relieved tank bracing is also installed to reinforce the tank’s interior & exterior weld joints.
3/16” (.47625 cm) ASTM A572 High Tensile Steel, with the hopper plating formed with the steel grain aligned with the flow of aggregate to the conveyor to reduce wear.
1. PACCAR MX Engine
This new PACCAR truck engine has increased low-end torque allowing the removal of the side engine. The traditional RoadSaver power is still available from engine to idle through the full range of operational speed. The newly designed machine runs quieter & reduces the air quality concerns inherent in older equipment. Side engine reporting requirements are now eliminated! The RoadSaver IIIG will prepare your organization for ever-tightening environmental regulations around the world. This system includes a REPTO design with a hot shift feature including specific safety elements to protect you & your crew.
2. Electric over Hydraulic Control System
This precision-engineered unit, patterned after the design of aerospace control systems, performs multiple hydraulic functions based on electrical input & system demand. Complete system redundancy is built through a fail-safe override system, insuring the ability to “finish the job.” This redundancy allows RoadSavers to live up to their motto – Relentlessly Reliable.
3. Quality Control System/Computerized Displays
State-of-the-art electronic sensors & computer displays provide real-time system information on:
* SAE & Metric units
*3 Languages: English, Spanish, Russian (other languages available for an additional cost)
The system continuously monitors the RoadSaver’s operation. Should electronic sensors detect any deviation from factory preset tolerances, an instantaneous signal will instruct the machine to initiate a shutdown or, if selected, alert the operator.
4. Dry Additive System
Hydraulically driven, infinitely variable, removable fines feeder with digital ratio meter allowing precise adjustment from operator control center.
5. Operator Control Center
An industry first & the “heart” of all RoadSavers, this unique design employs twin joysticks to control the following functions: one button sequenced start/stop, engine throttle control, spreader box lift, box side shift & auger control, pugmill gate control, diverter left/right control, & vibrator control.
6. Twin Drive/Twin Shaft Pugmill
All T-1 steel, each pugmill is built with twin hydraulic drives allowing double the torque to the mixing paddles. This system reduces the stress on gears & the high wear developed with systems that have one shaft “following” the other through a side load. Precise design & thorough field testing assure high productivity & product uniformity. The hydraulic diverter & pugmill gate provide even distribution & operator control of material supplied to the box. Drive motors are mounted in a remote, protected area with no bearings that need to be greased or replaced.